Indoor Tyre Testing
Tyre Testing Lab | |||
---|---|---|---|
Sl No | Test Name | Standards followed | |
1* | Rolling Resistace Test | ISO 28580, ISO 18164, SAE J1269, SAE J2452, ECE R117/Customer spec | |
2* | Endurance Test | IS 15633/FMVSS 109/ISO10191/AIS044/ECE 54/ IS 15636/FMVSS 139/ISO10454/ECE 30/FMVSS 119/IS 15627/ECE R106/GSO 645 646 647/Customer spec |
|
3* | Plunger Test | IS 15636/IS 15633/ECE30/ECE54/FMVSS109/FMVSS139 IS 15636/IS 15633/ISO10454/ASTMF414/AIS044ISO10191/SAEJ918/ASTMF414/AIS044/ PNS 25/Customer spec |
|
4* | Tyre Dimension | IS 15633/IS 15636/IS 15627/AIS044/ECE54/FMVSS119 FMVSS139/FMVSS109/ECE30/ECE75/GSO 51,52,53/GSO 645/ GSO 646/ISO 10919/ISO 10454/ PNS 25/Customer spec |
|
5* | Bead Unseating (TL passenger) | IS 15633/SAEJ918/FMVSS139/AIS044/ ISO 10191 | |
6* | Dynamic Growth Test for 2/3 wheeler | IS 15627/ECE 75 | |
7* | High Speed Test for Passenger Car Tyre | IS 15633/FMVSS 109/ISO10191/AIS044/ECE30 | |
8* | Tyre Stiffness Test(Tengential/Radial/Lateral/Torsional) | AIS 044 /SAEJ2718/Customer spec | |
9* | BEAD PRESSURE MAPPING | HASETRI procedure/Customer spec | |
10* | Bead Endurance Test | HASETRI procedure/Customer spec | |
11* | DLR Test | JATMA (Section G)/Customer spec | |
12* | Truck Load Deflection | AIS 044/Customer spec | |
13* | Footprint Pressure disribution & Average tread contact pressure distribution analysis | ASTM F870/Customer spec | |
14* | Tyre Footprint -(Ink Impression, Length,width,L/S ratio,Area) | ASTM F870/Customer spec | |
15* | Air Retention test | ASTM F112/Customer spec | |
16* | SLR Test | JATMA Section G/Customer spec | |
17* | Electrical Resistance (ER) | ASTM F1971/ISO16392 | |
18* | Thermography Test | Customer spec | |
19* | Shearography Test | HASETRI procedure | |
20* | Hot Spot (Speed+Thermography) | Customer spec | |
21* | Bead pullup test | HASETRI procedure | |
22* | Heat genaration Test | HASETRI procedure/td> | |
23* | Inner liner split test | HASETRI procedure | |
24* | Inner liner split test | HASETRI procedure | |
25* | Sidewall Plunger Test | HASETRI procedure |
* Test under NABL scope
Customer specification is not under NABL scope
Vehicle Dynamics Lab | |||
---|---|---|---|
Sl No | Test Name | Standards followed | Standards applicable |
A. Indoor NVH (Anechoic Chamber) | |||
1 | Tyre Noise Measurement | Internal | JASO C606 (Diff drum size & Mic pos) |
2 | Modal Testing | SAE J2710 | |
3 | Tyre Force Transmissibility | Hyundai ESIR | GMW 14876 |
4 | Sound Intensity Measurement | ISO 9614-1 | |
5 | Sound Power Measurement using Sound Pressure | ISO 3744 |
B. ONLEVEL | 1 | F&M | GMW15204 | SAE J1987 |
2 | PRAT | GMW15206 | SAE J1988 |